Find Quick Change Tool, Promotional Quick Change Tool, Finn-Power Quick Change Tools on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.
Home > Products > Quick Change Tool > Promotional Quick Change Tool Finn Power Hose Crimping Machine
The Latest Product Alerts Send Me
Promotional Quick Change Tool Finn Power Hose Crimping Machine
  • Promotional Quick Change Tool Finn Power Hose Crimping Machine
  • Promotional Quick Change Tool Finn Power Hose Crimping Machine
  • Promotional Quick Change Tool Finn Power Hose Crimping Machine
  • Promotional Quick Change Tool Finn Power Hose Crimping Machine
  • Promotional Quick Change Tool Finn Power Hose Crimping Machine
  • Promotional Quick Change Tool Finn Power Hose Crimping Machine
  • Promotional Quick Change Tool Finn Power Hose Crimping Machine
Payment Type: L/C, T/T, D/P, Western Union, Paypal, Money Gram
Min. Order: 1
Basic Info

Model No.:  HH-91H

Product Description Model NO.: HH-91H Condition: New Automatic Grade: Automatic Product Name: Design Promotional Finn Power Hose Crimping Tool Crimping Force: 500 Ton Rated Pressure: 31.5MPa Voltage: 220V 380V Weight: 350kg Trademark: HH91H Specification: 700*900*1400mm HS Code: 8462919000 Certification: SGS, CE, ISO Customized: Customized Structure: Vertical Crimping Range: 1/4" to 2" Ruler Precision: 0.01mm Power: 3kw Dimension: 700*900*1400 Dies Quantity: 10 Sets Transport Package: Wooden Case or as Buyer Required Origin: Tianjin, China HH91H Hose Crimping Machine introductions:

Brief Introduction
The hose crimping machine HH91H of my factory is suitable for industry, agriculture hose crimping. This machine is small, light and easy for operation.

Specification:
Type: HH91H(Computer size)
Crimping range: 1/8"-2"4SP/4" Industrial Hose
Voltage&Motor: 380V/4KW
Opening without dies: Φ160mm
Opening: ≥38mm
Crimping force: 3400KN
Open time: ≤1.5s
Close time: ≤8s
Standard Die Set: 16 Sets
Oil box: 45L
Hydraulic oil: Summer; YB-N46; Winter; YB-N32
Pump: 14.5L/min
System Pressure : 30Mpa
Outside Size(MM): 720*530*820
Weight (KGS): 269


HH91H hose crimping machine photo details:

 Promotional Quick Change Tool Finn Power Hose Crimping Machine
Promotional Quick Change Tool Finn Power Hose Crimping MachinePromotional Quick Change Tool Finn Power Hose Crimping Machine
Promotional Quick Change Tool Finn Power Hose Crimping Machine
Promotional Quick Change Tool Finn Power Hose Crimping MachinePromotional Quick Change Tool Finn Power Hose Crimping Machine
III. Installation and Operation
1. Add sufficiently 79 liters of Great Wall brand 46# anti-abrasion hydraulic oil. If the room temperature is lower than 10ºC, 10% transformer oil is need to add.
Connect the electric source well as per the machine requirements, to make the direction of the motor rotation to be consistent with the rotation direction marking, and grounding protection shall be done.
2. Regulating the scale
The scale is used for regulating the amount of the buckling. When it is regulated clockwise, the buckling amount will decrease, when it is regulated anticlockwise, the buckling amount will increase. The scale is connected together with oil cylinder end cover through three socket head screws and three springs on the scale base. When using a hand to pull the scale (vertical to the oil cylinder end cover direction), the scale can flexibly leave from the oil cylinder end cover. When releasing the scale, the scale will be recovered relying on spring force. Before the machine is turned on, inspect carefully if the scale telescoping is flexible and if the lead connection is reliable.
3. The primary scale is turned within 0 line of the secondary scale, turn the machine on for test run, and observe if all actions are normal. If when the piston conducts reciprocating movement, there is a crawling phenomenon, the bleed screw on the oil cylinder top shall be unscrewed for exhausting air.
4. Pressure regulation
The buckling pressure and opening mould pressure will be regulated through two knobs at the back of the oil cylinder (see figure), when it is regulated clockwise, the pressure will increase, when it is regulated anticlockwise, the pressure will decrease (The pressure has already been well regulated when ex-factory).
5. Operation
Based on the size of the Rubber Hose to be buckled, select suitable mould as per the technical parameter reference table of the locking pipe and mount it on the mould base. Regulated well the scale position as per the data in the data in the table, the pipe locking can be done. After pipe locking, use a vernier caliper to mease the outside diameter dimension of the pipe sleeve after buckling to see if it meets the reference table data of the parameter. If it does not meet the data, the scale shall be precisely regulated until it meets the requirements. Because the manufactures of the pipe sleeve are different, so, specific dimension, material, hardness etc are certainly not the same. These factors would result different influences on the pipe locking result, therefore, the data in the table is only for reference, the detailed data take the pressure test as the basis.
IV. Notices
When buckling, make the joint to locate the mould center as much as possible, the joint is not buckled on the hex nut.
Prevent tool and other foreign matter from entering the locking head.
After the work is finished for each time, the eight-block mould base must be made to extend to the greatest extent, this can make the spring to be at extension status. If not, the spring will be damage.
When working, the hand should not stretch into the locking head.
The power supply must be switched off when maintenance is done.
V. Maintenance and Care
Maintenance
Thydraulic oil in the oil tank should be frequently checked, if oil amount is found to be insufficient, the oil shall be timely supplemented. If the oil liquid is polluted, it shall be filtered or replaced.
The locking head shall keep internal cleanliness. Avoid the foreign matters during processing to enter into the locking head oil cylinder via the mould to affect the normal use. Wipe out the foreign matters, which are brought by the mould body in time when buckling the joint.
Frequently fill suitable grease into the mould body for lubrication.
VI. Promise
We will provide a guarantee to keep the machine in good repair within half a year from the date when the machine is purchased. All fitting troubles will be free of charge repaired (or replaced if necessary) during the guarantee period. The damage resulted from improper use o accident damage does not belong to free of charge repair range.
 
Troubleshooting
Trouble phenomena Trouble reason Eliminating method
Machine has not action Oil tank has not been filled with oil Fill oil as per requirement 
Motor rotation direction is not correct Regulate two phase lines
Electric trouble Overhaul electric circuits
Scale is damaged The scale is fastened on the oil cylinder end face by the screw Regulate the scale as per the instruction to make scale to telescope freely
Conductor at scale location is connected with scale Anew connect the scale conductor to make it to be insulated from scale base
Electric trouble Overhaul electric circuits and electric elements
Scale conductor cutting Anew connect scale
System pressure is excessively low Adjust buckling pressure-regulating valve
No buckling The valve core of solenoid reversal valve is seizured by foreign matters Dismount solenoid reversal valve, use gasoline to clean the valve core.
Electric trouble Overhaul electric circuits
Mould is not opened Opening mould pressure is excessively low Adjust opening mould pressure regulating valve
Electric trouble Overhaul electric circuits
Big noise Installation is not stable Conduct horizontal stable installation
Hydraulic oil is excessively dirty Filter or change it
Filter is blocked Use gasoline to clean the filter
Mould base crawls Gas in the hydraulic oil has not bee exhausted completely Suitable unscrew the bleed screw, make the piston in the oil cylinder to move back to last position to exhaust gas, then screw down bleed screw.
Lubrication is poor Smear grease on the working inclined face of mould base
Oil leakage Joint is not tightened closely Tighten the oil pipe joint
Sealing washer is damaged. Replace sealing washer.

 HH91H hose crimping machine dies details:
 
Hose Inside Diameter Couple outside diameter φmm(before crimping) Couple outside diameterφmm (after crimping) Die inside diameterφmm Matched ruler mm
                               
6 19 21 23 25 16 18 20 22 16 16 19 19 0 7 3.5 11
8 21 23 25 27 18 20 22 24 16 19 19 23 7 3.5 11 3.5
10 23 25 27 29 20 22 24 26 19 19 23 26 3.5 11 3.5 0
13 28 31 33 35 24 27 29 31 23 26 26 30 3.5 3.5 11 3.5
16 31 34 36 38 27 30 32 34 26 30 30 34 3.5 0 7 0
19 34 37 39 41 31 33 35 37 30 30 34 34 3.5 11 3.5 11
22 38 40 42 45 34 36 38 41 34 34 38 38 0 7 0 11
25 40 43 45 47 36 39 41 43 34 38 38 38 7 3.5 11 18
32 49 51 53 55 46 47 49 51 45 45 45 45 3.5 7 14 21
38 55 57 59 61 52 53 55 57 52 52 52 52 0 3.5 11 18
51 68 70 72 74 64 66 68 70 63 63 63
 
63 3.5 11 18 25
 

Advantage:
1.Professional manufacturing factory.
2.Good quality&service control system, produced by skilled workers.
3.Over 40 years experience of manufacturing marine&land steel pipe fittings.
4.Near Tianjin port-XINGANG, convenient and low cost for transport
5.Flexible payment method.
6.Timely and effective delivery
 
Any question please Contact:
Hebei Bohai Pipe Fitting Group Co., Ltd.
www.pipe-industry.com
Tel:86-22-8385965
Mob:86+13342080101
Manager:Mr John

Contact us if you need more details on Hose Crimping Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Hose Crimper、Hose Press Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Quick Change Tool

Email to this supplier
To:
*Messages:
Your message must be between 20-8000 characters