Find Hose Press Machine, Hose Crimping Machine, Hydraulic Hose Crimping Machine on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.
Home > Products > Hose Press Machine > Ce Approved Finn Power Techmaflex Uniflex 1/4′′~2′′ Hydraulic Hose Crimping Machine
The Latest Product Alerts Send Me
Ce Approved Finn Power Techmaflex Uniflex 1/4′′~2′′ Hydraulic Hose Crimping Machine
Basic Info

Model No.:  DX68

Product Description Model NO.: DX68 Condition: New Automatic Grade: Automatic Product Name: Finn Power 2" 10 Sets Free Dies Hydraulic Hose CRI Crimping Force: 450 Ton Oil Pump Displacement: 2.5ml/Rad 220V 5ml/Rad 380V Dimension: 670*430*950mm Warranty: Within 3 Years Trademark: DX68 Origin: Tianjin, China Certification: SGS, CE, ISO Customized: Customized Structure: Horizontal Crimping Range: 1/4" to 2" Ruler Precision: 0.01mm Power&Voltage: 3kw 220V&380V Weight: 260kg Payment: T/T, L/C or as Buyer Required Specification: 670*430*950mm HS Code: 8462919000 Ce Approved Finn Power Techmaflex Uniflex Hydraulic Hose Crimping Machine!
DX68 hosse crimping machine introductions:

I. Brief Introduction
Model DX68 Hose Crimping Machine is mainly used for buckling processing for high pressure rubber pipe assembly in the mechanical engineering. It can also be used for buckling the two-way bends, especially large bends and irregular shape bends.
This machine features small and portable appearance, big force, low noise and easy to operate. The buckling amount can be precise adjusted through a scale. It makes the mould base division to be more even through the double inclined plane eight-flap mould seat equipped with a high accuracy guiding device.

II. Main Technical Parameters:
Buckling range: 1/4" to 2"(6 layers steel wire Rubber Hose)
Max. buckling force: 449T
Scale accuracy: 0.02mm
Rated pressure: 31.5 MPa
Dies quantity:10 sets
Oil pump displacement: 5ml/rad (380V);
                    2.5ml/rad (220V)
Overall dimensions: 670(L)×490(W)×780(H)mm
Weight:260KG
Die quantity:10 sets
Payment terms:by T/T or L/C at sight
Delivery time:our factory has machine in stock
Warranty:within 3 years
Certificate:ISO9001 and CE
Packing:wooden case or as buyer required.

DX68 hose crimping machine photo details:

1.The head of machine:
Ce Approved Finn Power Techmaflex Uniflex 1/4''~2'' Hydraulic Hose Crimping Machine
2.The motor:
Ce Approved Finn Power Techmaflex Uniflex 1/4''~2'' Hydraulic Hose Crimping Machine
3.The panel:
Ce Approved Finn Power Techmaflex Uniflex 1/4''~2'' Hydraulic Hose Crimping Machine
4.The back of machine:
Ce Approved Finn Power Techmaflex Uniflex 1/4''~2'' Hydraulic Hose Crimping Machine
5.The dies:
Ce Approved Finn Power Techmaflex Uniflex 1/4''~2'' Hydraulic Hose Crimping Machine

III. Installation and Operation
1. Add sufficiently 79 liters of Great Wall brand 46# anti-abrasion hydraulic oil. If the room temperature is lower than 10ºC, 10% transformer oil is need to add.
Connect the electric source well as per the machine requirements, to make the direction of the motor rotation to be consistent with the rotation direction marking, and grounding protection shall be done.
2. Regulating the scale
The scale is used for regulating the amount of the buckling. When it is regulated clockwise, the buckling amount will decrease, when it is regulated anticlockwise, the buckling amount will increase. The scale is connected together with oil cylinder end cover through three socket head screws and three springs on the scale base. When using a hand to pull the scale (vertical to the oil cylinder end cover direction), the scale can flexibly leave from the oil cylinder end cover. When releasing the scale, the scale will be recovered relying on spring force. Before the machine is turned on, inspect carefully if the scale telescoping is flexible and if the lead connection is reliable.
3. The primary scale is turned within 0 line of the secondary scale, turn the machine on for test run, and observe if all actions are normal. If when the piston conducts reciprocating movement, there is a crawling phenomenon, the bleed screw on the oil cylinder top shall be unscrewed for exhausting air.
4. Pressure regulation
The buckling pressure and opening mould pressure will be regulated through two knobs at the back of the oil cylinder (see figure), when it is regulated clockwise, the pressure will increase, when it is regulated anticlockwise, the pressure will decrease (The pressure has already been well regulated when ex-factory).
5. Operation
Based on the size of the rubber hose to be buckled, select suitable mould as per the technical parameter reference table of the locking pipe and mount it on the mould base. Regulated well the scale position as per the data in the data in the table, the pipe locking can be done. After pipe locking, use a vernier caliper to mease the outside diameter dimension of the pipe sleeve after buckling to see if it meets the reference table data of the parameter. If it does not meet the data, the scale shall be precisely regulated until it meets the requirements. Because the manufactures of the pipe sleeve are different, so, specific dimension, material, hardness etc are certainly not the same. These factors would result different influences on the pipe locking result, therefore, the data in the table is only for reference, the detailed data take the pressure test as the basis.

IV. Notices
When buckling, make the joint to locate the mould center as much as possible, the joint is not buckled on the hex nut.
Prevent tool and other foreign matter from entering the locking head.
After the work is finished for each time, the eight-block mould base must be made to extend to the greatest extent, this can make the spring to be at extension status. If not, the spring will be damage.
When working, the hand should not stretch into the locking head.
The power supply must be switched off when maintenance is done.

V. Maintenance and Maintenance

The hydraulic oil in the oil tank should be frequently checked, if oil amount is found to be insufficient, the oil shall be timely supplemented. If the oil liquid is polluted, it shall be filtered or replaced.
The locking head shall keep internal cleanliness. Avoid the foreign matters during processing to enter into the locking head oil cylinder via the mould to affect the normal use. Wipe out the foreign matters, which are brought by the mould body in time when buckling the joint.
Frequently fill suitable grease into the mould body for lubrication.
VI. Promise
We will provide a guarantee to keep the machine in good repair within 12 months from the day when the machine is purchased. All fitting troubles will be free of charge repaired (or replaced if necessary) during the guarantee period. The damage resulted from improper use o accident damage does not belong to free of charge repair range.

Troubleshooting
 
Trouble phenomena Trouble reason Eliminating method
Machine has not action Oil tank has not been filled with oil Fill oil as per requirement
Motor rotation direction is not correct Regulate two phase lines
Electric trouble Overhaul electric circuits
Scale is damaged The scale is fastened on the oil cylinder end face by the screw Regulate the scale as per the instruction to make scale to telescope freely
Conductor at scale location is connected with scale Anew connect the scale conductor to make it to be insulated from scale base
Electric trouble Overhaul electric circuits and electric elements
Scale conductor cutting Anew connect scale
System pressure is excessively low Adjust buckling pressure-regulating valve
No buckling The valve core of solenoid reversal valve is seizured by foreign matters Dismount solenoid reversal valve, use gasoline to clean the valve core.
Electric trouble Overhaul electric circuits
Mould is not opened Opening mould pressure is excessively low Adjust opening mould pressure regulating valve
Electric trouble Overhaul electric circuits
Big noise Installation is not stable Conduct horizontal stable installation
Hydraulic oil is excessively dirty Filter or change it
Filter is blocked Use gasoline to clean the filter
Mould base crawls Gas in the hydraulic oil has not bee exhausted completely Suitable unscrew the bleed screw, make the piston in the oil cylinder to move back to last position to exhaust gas, then screw down bleed screw.
Lubrication is poor Smear grease on the working inclined face of mould base
Oil leakage Joint is not tightened closely Tighten the oil pipe joint
Sealing washer is damaged. Replace sealing washer.
 
A parameter list of the tooting and the press force for every type of rubble tube(for reference)
order Inner diameter of  the  rubble tube Outer diameter of  the rubble tube Used tooting Half locking & pressing meter pressure MPa Whole locking & pressing meter pressure MPa
1 Φ6   Φ15
Φ17
Φ15 5.5
6
6~8
9~11
2 Φ10   Φ19
Φ21
Φ21 6.5~7
7.5~8
10~11
13~16
3 Φ13
 
Φ23
Φ25
Φ27
Φ25 8.5~9
10~11
14~17
15~18
4 Φ16   Φ26
Φ28
Φ28 9~10
10~11
15~18
18~22
5 Φ19
 
Φ29
Φ31
Φ35
Φ30 9
11~12
22~24
15~17
20~22
29~31
6 Φ22
 
Φ32
Φ34
Φ38
Φ34 12~13
14~16
20~25
17~19
19~21
25~30
7 Φ25
 
Φ36
Φ38
Φ42
Φ38 10~11
15~16
26~28
16~18
20~24
28~32
8 Φ32
 
Φ44
Φ46
Φ50
Φ42
Φ45
12~13
16~18
32
18~22
30~34
32~38
9 Φ38
 
Φ50
Φ52
Φ60
Φ50
Φ55
14
20
26~30
22~26
28~32
44~48
10 Φ51
 
Φ63
Φ65
Φ69
Φ60
Φ65
25
30
35
26~28
40
48
 
The Packing List
 
1. The high pressure locking tube machine in model   DX 68         one set 
 
2.  Mold  (Total 10 Sets)
Φ6          1 set            
Φ10         1 set             
Φ13         1 set            
Φ16         1 set            
Φ19         1 set            
Φ22         1 set            
Φ25         1 set            
Φ32         1 set 
Φ38         1 set 
Φ51         1 set


Our factory contacts as follows:

Hebei Bohai Pipe Fitting Group Co., Ltd.
www.pipe-industry.com
Tel:86-22-8385965
 
Mob:+8615320080731
Manager:vicky
    
Website:http://www.pipe-industry.com
http://pipeindustry.en.made-in-china.com
Add:Paobei Industrial Area Mengcun Hebei CN.



 

Contact us if you need more details on Hose Crimping Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Hose Crimper、Hose Press Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Hose Press Machine

Email to this supplier
To:
*Messages:
Your message must be between 20-8000 characters